Note :
These are instructions on how to unlock the iPhone 3G and iPhone 3GS(iOS4.0 in iPhone 3GS Still can not be jailboken, So Guys Please stay 3.1.3 and Unlock your 3GS with UltraSn0w ) for use with any GSM cellphone carrier using UltraSn0w. This will work with the iOS 4.0 firmware.
Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, or 05.13.04 baseband(modem firmware).
To find your firmware and modem firmware(baseband) versions you can follow this tutorial.
If you are on T-Mobile remember to turn off 3G before starting...
Steps :
1] Press to launch Cydia Installer from your SpringBoard.
2] Press to select the Manage tab at the bottom of the screen.
3] Press to select the large Sources button.
4] If the ultrasn0w repo is not present press the Edit button at the top right of the screen. Otherwise, skip to Step Nine.
5] Press the Add button at the top left of the screen.
6] Enter http://repo666.ultrasn0w.com/ as the source url and press the Add Source button.
7] Once the source has been added press the large Return to Cydia button.
8] Press the Done button at the top right of the screen.
9] Press to select repo666.ultrasn0w.com from the list of user entered sources.
10] Press to select ultrasn0w from the list of packages
11] Press the Install button at the top right of the screen.
12] Press the Confirm button at the top right of the screen.
13] After installation completes successfully press the large Return to Cydia button.
14] Now press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right. Press the power button again to turn on the phone.
15] You should now be able to insert the SIM of your choice!
Credits : Iphone Dev Team. & All the Supporters.
For Any Kind Of Help Email Us: Admin@themobiforest.com
OR
Comment below...!
Thank You.
0 comments:
Post a Comment